Orient Pacific Drilling Supplies Pty Ltd
Sandvik DS-410-C Drill Rig – Year 2007
Overall Feed Rail Length = 3.950 Metres
Install – 2.4 Metre Rock Bolts
8 x Bolt Carousel
HL500 Drifter
Percussion Showing – 146 Hours
Power Pack – 881 Hours
Grout Mixer on Board
Currently in Workshop, Ideal for Tunnel Excavation Works .
HIRE RATES AVALIABLE
Price = $330,000 plus GST – Available for dry hire AND Buy back available .
open cab
Percussion Hours LOW
Power Pack Hours LOW
Drill currently in workshop being serviced and will be ready for work shortly
Test drilling available under 1000vlt power at workshop if required. Drill is set up to drill, install and grout up to 4.5 metre rock bolts. low hrs worked. Ideal for large tunnel excavation works , Sandvik Quality Built Machine.
Please contact us for more details …
a href=”http://www.opds.com.au/wp-content/uploads/2017/07/DSCN0214.jpg”>
Manufacturer – TEI Rock Drills
1.350 Metre Down Hole Hammer Drill Rod
Overall length – 2.8 Metres
Rotary Head
2.150 Metre Feed Travel.
Suit 3 to 4 ton excavator
Hire Available
Manufacturer – 1M0
Overall Length of Feed Rail = 3.450 Metres
Takes a 2.4 Metre Drill Set
Drill Depth = 2 Metres
Fits a 2 – 4 Tonne Excavator
Air Driven
Has roll over fitted to feed rail (Hydraulic)
Ideal for surface works, earth stakes, pin holes etc
Tunnel Works
Aluminium chain feed rail
Like New
AVAILABLE FOR HIRE OR FOR SALE
Serial # 98AM290
Note – Price includes brand new Hl 300 Drifter from Sandvik to be fitted . (Cost $38,000.00)
Pito Jaws
Recently serviced and ready to drill
New Remote Control Box
New HL300 Drifter on order (to be fitted)
Set up for up-hole drilling
Water Flush fitted
Overall Rail Length = 4 Metres
Can drill down 60 degrees Left and Right
Can drill 2.4 Metre single pass
Can reverse feed rail and re-fit dust collector for down holes
Diesel Hydraulic Drill
Ideal for small job access, Tunnel Works or surface blast holes.
IDEAL FOR TUNNELL WORKS, SHAFT SINKING.
Hire Rates Available
Please contact us for more details …
Atlas Copco Drifter
COP 1838HD – T38 07
AVO-11D 872E
4 x Bolt Nose Cone
Service Exchange Drifter .
No service details with drifter .
Sold as is .
Note – No warranty given with condition of drifter
Price = $40,000.00 plus gst
Atlas Copco Drifter
COP07 1838HD-T38
AVO 11D-852E
Service Exchange Drifter
No service history report with drifter
Sold as is where is .
Note – No warranty given with condition of drifter
Price = $40,000.00 plus gst
Doosan Moxy Truck concrete
Model: MT31
Year: 2011
Serial # : DINDMT31P30102
5 x Cubic Metre Bowl
Fire Suppression
E Stops
Currently in workshop for repairs and servicing.
Available for hire or for sale .
IDEAL FOR TUNNEL WORKS.
sandvik HLX5T Drifters (x3)
Reconditioned
Professionally Re-Built
For Sale $30,000 + GST (Each)
Sandvik Tamrock Axera 240 – DO7 Underground Production Drill
Year 2006 –
Sept 2017
$$$$ POA Currently on Hire
Includes 1 x spare Re-Conditioned HLX5T Drifter at extra cost if required.
Need a Drill that has had all the hard work done and is ready for work now, nothing to do but plug in . All inspections welcome, 0 hours worked since rebuild. Have 1000vlt power at workshop, so can see running for inspection.
QMRC (rebuild Queensland) Drill has been fitted with the following:-
TB 40 fully rebuilt complete booms from carrier
new fire suppression
new hydraulic hosing from controls to drifters,
serviced motor and hydraulic oils and filters,
SOS done on diffs, engine and transmission
Drill is available for , purchase or hire . Repairs alone , in excess of $200,000. You know how much a new one is $$$$$.!
Update: 9/4/2018 –
Drill has been Re-Commissioned under 1000 Volt Power.
All functions tested … ready to go to work.
Has been professionally painted at Paint Shop.
AVAILABLE NOW….
Weekly Dry Hire = $10,000.00
1 – 14 /10 split feeds.
2 – Hlx5 drifters fitted.
Serial # 106D9527-1
