Underground Drill Rigs

Sandvik DS-410-C Drill Rig – Year 2007

Overall Feed Rail Length = 3.950 Metres

Install – 2.4 Metre Rock Bolts

8 x Bolt Carousel

HL500 Drifter

Percussion Showing – 146 Hours

Power Pack – 881 Hours

Grout Mixer on Board

Currently in Workshop, Ideal for Tunnel Excavation Works .

HIRE RATES AVALIABLE

Sandvik Robolt 08-03 (Year 2007) (Unit # 81) OPEN CAB TUNNEL ROCK BOLTER

Price = $330,000 plus GST – Available for dry hire AND Buy back available .

open cab

Percussion Hours LOW

Power Pack Hours LOW

Drill currently in workshop being serviced and will be ready for work shortly

Test drilling available under 1000vlt power at workshop if required. Drill is set up to drill, install and grout up to 4.5 metre rock bolts. low hrs worked. Ideal for large tunnel excavation works , Sandvik Quality Built Machine.

Please contact us for more details …

a href=”http://www.opds.com.au/wp-content/uploads/2017/07/DSCN0214.jpg”>

Excavator Quick Hitch Drill Feed Rail = $22,000.00

Manufacturer – 1M0

Overall Length of Feed Rail = 3.450 Metres

Takes a 2.4 Metre Drill Set

Drill Depth = 2 Metres

Fits a 2 – 4 Tonne Excavator

Air Driven

Has roll over fitted to feed rail (Hydraulic)

Ideal for surface works, earth stakes, pin holes etc

Tunnel Works

Aluminium chain feed rail

Like New

AVAILABLE FOR HIRE OR FOR SALE

Tamrock Commando 300 UNIT # 16 = $130,000.00

Serial # 98AM290

Note – Price includes brand new Hl 300 Drifter from Sandvik to be fitted . (Cost $38,000.00)

Pito Jaws

Recently serviced and ready to drill

New Remote Control Box

New HL300 Drifter on order (to be fitted)

Set up for up-hole drilling

Water Flush fitted

Overall Rail Length = 4 Metres

Can drill down 60 degrees Left and Right

Can drill 2.4 Metre single pass

Can reverse feed rail and re-fit dust collector for down holes

Diesel Hydraulic Drill

Ideal for small job access, Tunnel Works or surface blast holes.

IDEAL FOR TUNNELL WORKS, SHAFT SINKING.

Hire Rates Available

Please contact us for more details …

SANDVIK HLX5T DRIFTERS (X3)

sandvik HLX5T Drifters (x3)

Reconditioned

Professionally Re-Built

For Sale $30,000 + GST (Each)

Sandvik Axera 240 – DO7 – Underground Production Drill – Year 2006 – Unit # 65

Sandvik Tamrock Axera 240 – DO7 Underground Production Drill

Year 2006 –

Sept 2017

$$$$ POA Currently on Hire

Includes 1 x spare Re-Conditioned HLX5T Drifter at extra cost if required.

Need a Drill that has had all the hard work done and is ready for work now, nothing to do but plug in . All inspections welcome, 0 hours worked since rebuild. Have 1000vlt power at workshop, so can see running for inspection.

QMRC (rebuild Queensland) Drill has been fitted with the following:-

TB 40 fully rebuilt complete booms from carrier
new fire suppression
new hydraulic hosing from controls to drifters,
serviced motor and hydraulic oils and filters,
SOS done on diffs, engine and transmission

Drill is available for , purchase or hire . Repairs alone , in excess of $200,000. You know how much a new one is $$$$$.!

Update: 9/4/2018 –

Drill has been Re-Commissioned under 1000 Volt Power.
All functions tested … ready to go to work.
Has been professionally painted at Paint Shop.

AVAILABLE NOW….

Weekly Dry Hire = $10,000.00

1 – 14 /10 split feeds.

2 – Hlx5 drifters fitted.

Serial # 106D9527-1